Wol-Ceram ELC-2020

Wol-Ceram ELC-2020 Electro Layering Ceramic Dental CAD/CAM System

Wol-Ceram ELC-2020
Product Code: wol-ceram elc-2020
Availability: In Stock
Price: $1,500.00
Qty:        

Sale used Wol-Ceram ELC-2020 Electro Layering Ceramic Dental CAD/CAM System

Product Description
The Wol-Ceram ELC (Electro Layering Ceramic) system is a state of the art Electro-layering and CAD/CAM system designed to work with Vita In-Ceram materials that increases accuracy and strength while significantly reducing turn around time. Copings, bridges, implant abutments and implant frames are possible. Because the system works off the original die, it is able to produce an extremely accurate fit and the most precise margins of any CAD/CAM dental system available. Because all work is done in house, turnaround time is drastically reduced. Best of all, the system works on any margin prep so your dentist does not have to change anything to utilize it.

Product Feature

  • The method with which the coping material is applied to the die is what's different and revolutionary about Wol-Ceram. Using a unique process called EPC (electrophoretic ceramic procedure); Vita In-Ceram material is applied in a dense and consistent thickness to the master die. This technology allows for a precise fit, excellent translucency and aesthetics. 
  • Cost Effective
  • Precise Fit From Original Die
  • No Special Preparations
  • WOL-CERAM ELC and CAD/CAM capable 
  • All the benefits and strength of electroplating
  • Capable of creating Copings, Bridges
  • Implant Abutments, Implant Bridge Frameworks
  • Runs 5 units in sequence with no user intervention
  • Creates 80 units per day
  • Designed to be upgradable

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

Sale used Wol-Ceram ELC-2020 Electro Layering Ceramic Dental CAD/CAM System

Product Description
The Wol-Ceram ELC (Electro Layering Ceramic) system is a state of the art Electro-layering and CAD/CAM system designed to work with Vita In-Ceram materials that increases accuracy and strength while significantly reducing turn around time. Copings, bridges, implant abutments and implant frames are possible. Because the system works off the original die, it is able to produce an extremely accurate fit and the most precise margins of any CAD/CAM dental system available. Because all work is done in house, turnaround time is drastically reduced. Best of all, the system works on any margin prep so your dentist does not have to change anything to utilize it.

Product Feature

  • The method with which the coping material is applied to the die is what's different and revolutionary about Wol-Ceram. Using a unique process called EPC (electrophoretic ceramic procedure); Vita In-Ceram material is applied in a dense and consistent thickness to the master die. This technology allows for a precise fit, excellent translucency and aesthetics. 
  • Cost Effective
  • Precise Fit From Original Die
  • No Special Preparations
  • WOL-CERAM ELC and CAD/CAM capable 
  • All the benefits and strength of electroplating
  • Capable of creating Copings, Bridges
  • Implant Abutments, Implant Bridge Frameworks
  • Runs 5 units in sequence with no user intervention
  • Creates 80 units per day
  • Designed to be upgradable

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright ©2017 Hutama Medical Corp. All Rights Reserved.